|
| ขั้นต่ำ: | 5 ชิ้น |
| ราคา: | negotiable |
| วิธีการชำระเงิน: | L/C, D/A, D/P, T/T |
| ความสามารถในการจัดหา: | 500 |
8.2-12.4GHz WR-137 WAVEGUIDE LOAD
WAVEGUIDE LOAD is not an option – it is a mandatory component in any non‑radiating waveguide setup. Always verify the power rating, flange type, and cooling method before deploying a WAVEGUIDE LOAD in your system.
A WAVEGUIDE LOAD is a passive, non-radiating termination device used in waveguide transmission systems. Its primary electrical characteristic is to present a matched impedance (typically 50 ohms equivalent or the waveguide’s characteristic impedance) to the source, thereby absorbing incident microwave energy with minimal reflection.
oupler port. Ensure the flange type (e.g., UG, CPR, cover, choke) matches the system.
| Part Number | VN-WGLD-0812-WR90 |
| Operating Frequency ( GHz ) | 8.2-12.4 |
| Impedance ( Ohm ) | 50 |
| VSWR | ≤1.03 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Interface | WR90(BJ100) |
| Dimension(mm) | As below |
| Handling Power | 2 (Watt, max) |
| ROHS Compliance | Yes |
|
|
| ขั้นต่ำ: | 5 ชิ้น |
| ราคา: | negotiable |
| วิธีการชำระเงิน: | L/C, D/A, D/P, T/T |
| ความสามารถในการจัดหา: | 500 |
8.2-12.4GHz WR-137 WAVEGUIDE LOAD
WAVEGUIDE LOAD is not an option – it is a mandatory component in any non‑radiating waveguide setup. Always verify the power rating, flange type, and cooling method before deploying a WAVEGUIDE LOAD in your system.
A WAVEGUIDE LOAD is a passive, non-radiating termination device used in waveguide transmission systems. Its primary electrical characteristic is to present a matched impedance (typically 50 ohms equivalent or the waveguide’s characteristic impedance) to the source, thereby absorbing incident microwave energy with minimal reflection.
oupler port. Ensure the flange type (e.g., UG, CPR, cover, choke) matches the system.
| Part Number | VN-WGLD-0812-WR90 |
| Operating Frequency ( GHz ) | 8.2-12.4 |
| Impedance ( Ohm ) | 50 |
| VSWR | ≤1.03 |
| Operating Temperature ( ℃ ) | -40 ~ + 80 |
| Interface | WR90(BJ100) |
| Dimension(mm) | As below |
| Handling Power | 2 (Watt, max) |
| ROHS Compliance | Yes |
